25 LITERS 1.5 INCHES "MAGNUM TURBO" DISTILLER COLUMN

Mash column "Magnum Turbo" (clamp 1.5") with a domed tank of 25 liters
7 baffled (partitioned) tubes in condensers!

Intended for separation of liquid mixes which components have various boiling points. Can be used for distillation of water and other liquids and mixtures, production of essential oils, hydrolats and aromatic water by evaporation and condensation (distillation) of raw materials

Basic equipment:

• 25 liters tank with domed lid with a clamp connection, stainless steel AISI304
• Thermometer with nipple in cap
• Drain tap, stainless steel 1/2"
• 1.5" tsarga (main tube) side 500 mm stainless steel
• 1.5" Dephlegmator 200 mm
• 1.5" Elbows (angles) 2 pcs (one with nipple)
• 1.5" Cooler 400 mm
• 1.5" Receiving "spout" with a tube connection with the atmosphere
• Thermometer
• 2" exit for the heating element
• Plug for the exit for the heating element
• 1.5" Clamps with gaskets 7 pcs
• Panchenkova grid stainless steel 5 pcs
• Sanitary kit:
  → needle taps plastic 2 pcs
  → quick-release brass 2 pcs
  → plastic tees 2 pcs
  → polyurethane hose 4 m
  → silicone hose 1 m
  → fum tape 1 pc

The device is immediately ready for use. You don't need to buy anything. Everything is very simple and easy - assemble the device, connect it and start working.

Specifications:

• Height assembled (with cube 25 l) 1270 mm
• Height assembled (with cube 40 l) 1320 mm
• Dephlegmator height 200 mm, 7 tubes 10 mm each. 3 partitions. Power up to 2000 W*
• Cooler height 400 mm, 7 tubes 10 mm each. 5 partitions. Power up to 5000 W*
• Tube diameter 38 mm
• Tsarga (main tube) height 500 mm
• Quick-detach fitting 1/4" for 10 mm hose
• Food grade stainless steel AISI304

*power depends on the temperature of the water that is supplied, the connection method, the speed of the water supply and other factors

Speed in the first stage mode (PotStill) up to 7 l/h
Speed in rerun (second) mode up to 2.5 l/g (recommended)

Note: the transfer speed depends on the heater power

Packing parameters (L/H/W, weight):

25L - 36/36/47 cm (10.4 kg)

40L - 40/40/54 cm (11.8 kg)

Water connection diagram

Superpower mash column "Magnum Turbo". For clamp 1.5 inches.
7 baffled (partitioned) tubes in condensers!

Specifications:

• Height assembled 820 mm
• Dephlegmator height 200 mm, 7 tubes 10 mm each. 3 partitions. Power up to 2000 W
• Cooler height 400 mm, 7 tubes 10 mm each. 5 partitions. Power up to 5000 W
• Tube diameter 38 mm
• Clamp 1.5 inches
• Main tube (tsarga) height 500 mm
• Quick-detach fitting 1/4" for 10 mm hose
• Food grade stainless steel AISI304

The tank from Magnum Still 25 liters

The "Magnum Turbo" package includes a new generation tank with a dome lid on a 1.5-inch clamp with a volume of 25 liters.

Advantages of advanced tanks:

• lack of welds;
• impeccable polishing quality;
• absolute tightness of all connections;
• appearance - domed;
• volume marking inside the tank;
• unique clamping system;
• rubberized heat-resistant handles.

All tanks are designed for use on all types of stoves.

The lid is domed. It is securely fixed by means of a clamping system consisting of four latches. The silicone gasket ensures the tightness of the connection. On the lid there is a sleeve for a thermometer, equipped with a special hermetic cuff, and an outlet for a 1.5-inch clamp. The function of the overpressure valve is performed by latches. Their flexible design relieves excess pressure. A ball valve provides drainage.

In the production of new generation cubes, innovative technology is used. The "seamless" design does not allow the remains of the mash to get stuck or burnt particles to accumulate. Perfect grinding eliminates the appearance of corrosion and microcracks.

In improved tanks there is an outlet for a heating element with a power of 3 or 4.5 kW. The heating element can be used as an alternative heating source instead of a stove or in combination with it to increase productivity.

Basic configuration of the tank:

• Distillation tank 25 liters with a spherical (dome) lid for a 1.5" clamp
• Silicone gasket
• Digital thermometer
• Nipple for thermometer, stainless steel
• Stainless steel drain tap, 1/2" female thread
• Outlet for the heating element 2 inches
• Plug for the exit for the heating element

Tank features:

• Food grade stainless steel AISI304
• Tank volume: 25 liters
• Lid volume: ≈ 1.8 liters
• Cover thickness 1.2 mm
• The wall thickness of the tank is 1 mm
• The bottom thickness is approximately 5 mm. The bottom is flat, three-layer, with an aluminum layer for even heat distribution. Bottom material AISI 430 (magnetic food grade stainless steel)
• Rubberized handles
• Coupling for tap with external thread 1/2". Stainless steel tap 1/2"
• Stiffening rib for installing a false bottom at a distance of about 80 mm from the bottom
• Number of clips 4 pcs

Manufacturer - Magnum Still