57 LITERS 2 INCHES "SK PROFI GLASS 2.0" DISTILLER RECTIFICATION COLUMN

Distiller "SK PROFI GLASS 2.0" mash-distillation column 2 inches with a cube of 57 liters with a thick (2 mm) domed lid
with vertical Dimroth dephlegmator with double spiral in diopter
with a phlegm (reflux) centralizer cone-cup in the diopter (a unique development of the manufacturer)
with a liquid selection unit
+ polyurethane cover for the main tube - as a gift

Intended for separation of liquid mixes which components have various boiling points. Can be used for distillation of water and other liquids and mixtures, production of essential oils, hydrolats and aromatic water by evaporation and condensation (distillation) of raw materials.

AISI-430 stainless steel is NOT USED in welded structures.

Basic configuration of the column:
Clamp 2.0 + silicone gasket - set.
Dimroth delegmator with double spiral in diopter - 1 pc.
Phlegm centralizer in diopter - 1 pc.
Liquid selection unit with a stainless steel tap for adjusting the selection speed - 1 pc.
Final product aftercooler with mini-diopter with built-in water direction spiral - 1 pc.
60 cm main tube stainless steel - 1 pc.
Main tube diameter - 51 mm.
Nipple fitting for thermometer + thermometer - 1 pc.
Quick connectors 2" - 4 pcs.
Sanitary kit - polyurethane tube 5 m, transition from quick release with a diameter of 8 mm to an external thread ½ for connection to the water supply - 1 pc.
Panchenkova mesh (main tube filler) - 5 wads.

Column characteristics:
Food grade non-magnetic stainless steel AISI-304.
Liquid selection with aftercooler with mini-diopter.
The recycling power of the Dimroth dephlegtmator (reflux condenser) is up to 4 kW.
Dephlegmator wall thickness - 1.5 mm

Basic equipment "SK PROFI GLASS 2.0":
Clamp 2.0 + silicone gasket - set.
Dimroth delegmator with double spiral in diopter - 1 pc.
Phlegm centralizer in diopter - 1 pc.
Liquid selection unit with a stainless steel tap for adjusting the selection speed - 1 pc.
Final product aftercooler with mini-diopter with built-in water direction spiral - 1 pc.
60 cm main tube stainless steel - 1 pc.
Main tube diameter - 51 mm.
Nipple fitting for thermometer + thermometer - 1 pc.
Quick connectors 2" - 4 pcs.
Sanitary kit - polyurethane tube 5 m, transition from quick release with a diameter of 8 mm to an external thread ½ for connection to the water supply - 1 pc.
Panchenkova mesh (main tube filler) - 5 wads.

Distillation tank 57 liters (50+7) - 1 pc.
Dome lid (7 liters) - 1 pc.
Safety valve - 1 pc.
Cover clamp + silicone gasket - 1 pc.
Output for heating element + clamp + silicone gasket - 1 pc.
Drain tap 3/4 - 1 pc.

Kit characteristics:

Distiller:
Food grade non-magnetic stainless steel AISI-304.
Selection by liquid.
The dephlegmator utilization power is up to 4 kW.
Dephlegmator wall thickness - 1.5 mm

Vertical Dimroth dephlegmator (reflux condenser) with double spiral in diopter:

The length of the dephlegmator tube is 4.5 meters.
The diameter of the dephlegmator tube is 6 mm.
The dephlegmator utilization power is up to 4 kW.
The thickness of the dephlegmator wall is 1.5 mm.
Assembled height 22 cm.

Liquid selection unit cone-cup in diopter:
A phlegm centralizer is needed so that the phlegm flows onto the nozzle into the very center of the main tube with the filler, in order to reduce the “wall” effect (when the phlegm flows along the walls of the tube bypassing the nozzle).

2-inch head/tail selection unit with multi-point nozzle irrigation (9 jets).

The selection assembly with nozzle multi-point irrigation reduces the wall effect to a minimum.
Each of the 9 jets immediately, independently of each other, enters the process of heat and mass transfer.
This allowed to reduce the height of the main tube.

With aftercooler with viewing window:

Aftercooler with a stainless steel tap, with push-in connections for an 8 mm tube, with a mini-diopter, with couplings for connecting 1/4″ quick releases.
Equipped with an internal built-in spiral to distribute the water flow evenly.
The length from the tap to the product drain is 42 cm, which is enough to further cool the product with a dephlegmator operating power of up to 4 kW.

Distillation tank:
The stainless steel grade is non-magnetic! AISI-304.
Bottom type - sandwich (food grade stainless steel/aluminum/magnetic stainless steel), suitable for all types of stoves, including induction stove.
Bottom thickness - 5 mm.
Wall thickness - 1 mm.
Lid thickness - 2 mm.
Diameter - 428 mm.

Options for expanding the ability to operate the distillation tank:

Copper cone lid
Designed to eliminate unpleasant tastes and odors of sulfur compounds through contact with copper, and also works as a cube enlarger.

Copper insert
Designed to increase the contact area with copper. It is an excellent and more practical alternative to a copper tank. Contact with copper is doubled (due to the fact that the walls of the insert are washed on both sides). The insert is convenient to remove and wash.

Stainless steel tank magnifier
Allows to increase the volume of the distillation tank, it is completely sealed (fixed with a silicone seal and a stainless steel clamp).

Insert for cheese making
Allows to turn a distillation tank into a full-fledged home cheese factory-pasteurizer.

Steam-water insert
Allows to distill any type of mash, thick mash, fruit mash, etc. You can brew beer, distill grains, fruit mashes.

Brewing insert
Allows to use the tank as a mini-brewery.

Copper tank magnifier
Allows to increase the volume of the distillation tank, it is completely sealed (fixed with a silicone seal and a stainless steel clamp), eliminates unpleasant tastes and odors of sulfur compounds due to contact with copper.

Basket for malt and thick raw materials
A high-quality alternative to a false bottom. Protects the wort from burning (suitable for mashing wort, distilling thick raw materials, etc.).

Tank 57 liters (50+7) with thick (2 mm) dome lid:

A specialized professional distillation tank with a completely removable lid, equipped with a stainless steel clamp-lock (clamp connection type), made of food-grade non-magnetic stainless steel AISI-304. A perfectly flat three-layer sandwich bottom ensures correct, uniform heating of the entire surface of the bottom, and not just the location of the heating source, to avoid burning and overheating. Inside the tank there is a volume marking. Suitable for all types of stoves. There is an exit for installing a heating element.

The heating element with power regulator is purchased separately.

Basic equipment:
Safety valve - 1 pc.
Connection for thermometer - 1 pc.
Cover with outlet for 2" clamp - 1 pc.
Lid clamp - 1 pc.
Silicone gasket under the cover - 1 pc.
Output for heating element + clamp + silicone gasket - 1 pc.
Drain tap 3/4 - 1 pc.
ATTENTION: The heating element with regulator must be purchased separately.

Tank characteristics:
Stainless steel grade: AISI-304.
Bottom type: sandwich (food grade stainless steel/aluminum/magnetic stainless steel).
Bottom thickness: 5 mm.
Wall thickness: 1 mm.
Lid thickness: 2 mm.

Dimensions:
Diameter: 428 mm

Made in Ukraine