42 LITERS 2 INCHES "SK PROFI UNIVERSAL 2.0" DISTILLER RECTIFICATION COLUMN

Distiller "SK PROFI UNIVERSAL 2.0" mash distillation column 2 inches with a tank of 42 liters with a thick (2 mm) domed lid
SK Profi 2 inches dephlegmator with built-in Bokakoba liquid selection unit.
Steam selection unit
+ polyurethane cover for the drawer - as a gift

Intended for separation of liquid mixes which components have various boiling points. Can be used for distillation of water and other liquids and mixtures, production of essential oils, hydrolats and aromatic water by evaporation and condensation (distillation) of raw materials.

AISI-430 stainless steel is NOT USED in welded structures.

Basic configuration:
clamp clamp + silicone gasket - set
sk profi dephlegmator (reflux condenser) with a dimroth double spiral - 1 pc.
liquid sampling unit with a low-pressure tap for adjusting the sampling speed - 1 pc.
final product aftercooler with mini-diopter with built-in water direction spiral - 1 pc.
steam sampling unit with a low-pressure tap for adjusting the extraction speed - 1 pc.
angle tube 90°  – 1 pc.
9-tube 5-partition refrigerator (cooler) with product drain spout - 1 pc.
60 cm main tube (tsarga) with a diameter of 51 mm - 1 piece
nipple fitting for thermometer + thermometer - 2 pcs.
quick connector - 6 pcs.
water supply control valve - 2 pcs.
sanitary kit - polyurethane tube 6 m, adapter with quick release dia. 8 mm on external thread 1/2 for connection to water supply, tees with quick releases 2 pcs - 1 pc.

distillation cube 42 L (37+5) - 1 pc.
dome lid - 1 pc.
safety valve - 1 pc.
lid clamp + silicone gasket - 1 pc.
drain tap 3/4 - 1 pc.

Characteristics:

Distiller:

Food grade non-magnetic stainless steel AISI-304
Selection by liquid and steam
Dephlegmator utilization power up to 4 kW
Potstill capacity up to 10 L/hour (depending on the supplied power)
Dephlegmator wall thickness - 1.5 mm

SK Profi 2 inches dephlegmator with built-in Bokakoba liquid selection unit:
Convenient combination of a reflux condenser and a selection unit in one device. Reduces the cost of construction and facilitates assembly.
The upper part is made of a tube with a diameter of 76 mm, which allowed to place a Dimroth double spiral with a diameter of 8, not 6 mm.

The length of the dephlegmator tube is 4 meters.
The diameter of the dephlegmator tube is 8 mm.
The dephlegmator utilization power is up to 4 kW.
The thickness of the dephlegmator wall is 1.5 mm.

With aftercooler with a viewing window (mini-diopter)

Aftercooler with a stainless steel tap, with push-in connections for an 8 mm tube, with a mini-diopter, with couplings for connecting 1/4″ quick releases.
Equipped with an internal built-in spiral to distribute the water flow evenly.

The length from the tap to the product drain is 42 cm, which is enough to further cool the product with a dephlegmator operating power of up to 4 kW.

Steam selection unit 2 inches with the ability to install a gin-basket:

a - collapsible gin-basket. Option. Sold separately.

Distillation tank:

Non-magnetic stainless steel grade! AISI-304
Bottom type - sandwich (food grade stainless steel/aluminum/magnetic stainless steel), suitable for all types of stoves, including induction
Bottom thickness 5 mm
Wall thickness 1 mm
Cover thickness 2 mm
Diameter 378 mm

Purpose of SK PROFI UNIVERSAL 2.0:

The universal construction of the SK PROFI UNIVERSAL 2.0 apparatus allows the operator to conduct the distillation process using all possible methods with options for selecting any of them at different stages of the distillation process without stopping or disassembling the apparatus.

For example:
After warming up and stabilization, it will be convenient to select the head fraction from the liquid; the diopter on the selection tap greatly helps to adjust the selection speed.

After selecting the “head”, it is possible to turn off the dephlegmator and carry out the process in direct flow (with the steam selection tap fully open) to the desired wanted strength of the product in the stream (it is different for each liquid) to maximize the preservation of the organoleptics of the feedstock (the so-called dephlegmator-free selection).

After reaching the desired strength value of the product in the stream, you can connect the dephlegmator, turn off the selection valve, let it work “on its own” for 10 minutes and then “squeeze” the remaining product in the rectification mode, both steam and liquid (to choose from).

It is possible to connect a universal collapsible rotating gin-basket with setting the cooler position convenient for the operator to flavor the resulting product.

In potstill mode, it is possible to completely disconnect the selection valve, due to which all narrowings for steam are removed, which allows the distillation process to be carried out as quickly as possible.

Advantages of SK PROFI UNIVERSAL 2.0:

• a powerful dephlegmator and cooler allow you to easily utilize up to 5 kW of supplied power, which is done with a large margin for the home electrical network;
• mini-diopter on the aftercooler (selection valve) for convenient visual monitoring of the speed directly at the selection unit, and not at the product exit from the tube at the bottom of the device;
• steam selection unit with a temperature sensor in the steam zone, a level gauge for monitoring the “flood”, a detachable 3/4 st. steel valve;
• sanitary kit: tube 8*1.5 mm – 5 m with an exit for a 1/2 external thread or an adapter for a faucet with a quick release (purchased separately), rotary needle taps for adjusting the water supply with quick releases – 2 pcs (on the steam selection cooler and on aftercooler for liquid selection), an outflow water control unit with a quick release (allows you to work with each circuit (steam or liquid) both independently and jointly - redirect the circuit with taps at the right time and monitor the temperature of the outflowing water, which allows you to accurately adjust the required flow water to the required temperature (40-50°C) to avoid overcooling of the phlegm and unnecessary consumption of cooling water).

Basic complectation:

1.     clamp 2″ + silicone gasket – 8 pcs.
2.     main tube 600 mm – 1 pc.
3.     thermometer – 2 pcs.
4.     cooler spout – 1 pc.
5.     quick-release connection – 7 pcs.
6.     rotary tap for fine adjustment of water supply – 2 pcs.
7.     9-tube 5-partition shell-and-tube cooler 6*12 mm
8.     angle tube 90°  – 1 pc.
9.     st. steel tap 3/4 for adjusting the sampling speed – 1 pc.
10.  flowing water temperature control unit – 1 pc.
11.  double spiral Dimroth dephlegmator 5 meters, tube 8 mm – 1 pc.
12.  needle valve for adjusting the sampling speed – 1 pc.
13.  mini-diopter – 1 pc.
14.  aftercooler – 1 pc.

Water connection scheme:

1) inlet of the cooling water hose into the “steam selection“ circuit
2) outlet of the cooling water hose from the cooler and connection to the double water inlet into the dephlegmator
3) double water entry into the dephlegmator
4) outlet for connecting the water hose to the sewerage
5) outlet of the cooling water hose from the cooler and connection to the double water inlet into the dephlegmator
6) inlet of the cooling water hose into the “liquid selection” circuit

Options for expanding the ability to operate the distillation tank:

Copper cone lid
Designed to eliminate unpleasant tastes and odors of sulfur compounds through contact with copper, and also works as a cube enlarger.

Copper insert
Designed to increase the contact area with copper. It is an excellent and more practical alternative to a copper tank. Contact with copper is doubled (due to the fact that the walls of the insert are washed on both sides). The insert is convenient to remove and wash.

Stainless steel tank magnifier
Allows to increase the volume of the distillation tank, it is completely sealed (fixed with a silicone seal and a stainless steel clamp).

Insert for cheese making
Allows to turn a distillation tank into a full-fledged home cheese factory-pasteurizer.

Steam-water insert
Allows to distill any type of mash, thick mash, fruit mash, etc. You can brew beer, distill grains, fruit mashes.

Brewing insert
Allows to use the tank as a mini-brewery.

Copper tank magnifier
Allows to increase the volume of the distillation tank, it is completely sealed (fixed with a silicone seal and a stainless steel clamp), eliminates unpleasant tastes and odors of sulfur compounds due to contact with copper.

Basket for malt and thick raw materials
A high-quality alternative to a false bottom. Protects the wort from burning (suitable for mashing wort, distilling thick raw materials, etc.).

Tank 42 liters (37+5) with thick (2 mm) dome lid:
A specialized professional distillation tank with a completely removable lid, equipped with a stainless steel clamp-lock (clamp connection type), made of food-grade non-magnetic stainless steel AISI-304. A perfectly flat three-layer sandwich bottom ensures correct, uniform heating of the entire surface of the bottom, and not just the location of the heating source, to avoid burning and overheating. Inside the tank there is a volume marking. Suitable for all types of stoves. There is an exit for installing a heating element.

The heating element with power regulator is purchased separately.

Basic equipment:
Safety valve - 1 pc.
Connection for thermometer - 1 pc.
Cover with outlet for 2" clamp - 1 pc.
Lid clamp - 1 pc.
Silicone gasket under the cover - 1 pc.
Output for heating element + clamp + silicone gasket - 1 pc.
Drain tap 3/4 - 1 pc.
ATTENTION: The heating element with regulator must be purchased separately.

Tank characteristics:
Stainless steel grade: AISI-304.
Bottom type: sandwich (food grade stainless steel/aluminum/magnetic stainless steel).
Bottom thickness: 5 mm.
Wall thickness: 1 mm.
Lid thickness: 2 mm.

Dimensions:
Diameter: 378 mm

Made in Ukraine