57 LITERS 3.0" "SK PROFI 3.0" RECTIFICATION COLUMN

Distiller "SK PROFI 3.0" rectification column 3 inches with a cube of 57 liters with a thick (2 mm) domed lid
with vertical collapsible Dimroth dephlegmator 3" with double spiral
with 3" liquid sampling unit (unique development of the manufacturer)
with aftercooler with mini-diopter

+ polyurethane cover for the main tube - as a gift

Intended for separation of liquid mixes which components have various boiling points. Can be used for distillation of water and other liquids and mixtures, production of essential oils, hydrolats and aromatic water by evaporation and condensation (distillation) of raw materials.

AISI-430 stainless steel is NOT USED in welded structures.

"SK PROFI 3.0" basic equipment:
clamp clamp 3" + silicone gasket - set.
3" dimrot dephlegmator with double spiral - 1 pc.
liquid sampling unit 3" with stainless steel tap for adjusting the sampling speed - 1 pc.
3" glass diopter (optional). Sold separately
final product aftercooler with mini-diopter with built-in water direction spiral - 1 pc.
3" main tube (tsarga) 50 cm with nozzle SPN 3*3 - 1 pc.
nipple fitting for thermometer + thermometer - 2 pcs.
quick release connection - 4 pcs.
sanitary kit (gift) - polyurethane tube 5 m, transition from quick release dia. 8 mm to external thread 1/2 for connection to water supply - 1 pc.

distillation cube 57 l (50+7) - 1 pc.
dome cover - 1 pc.
safety valve - 1 pc.
lid clamp + silicone gasket - 1 pc.
drain tap 3/4 - 1 pc.

"SK PROFI 3.0" components:

Consists of:
3" stainless steel tube 20 cm.
Dimroth dephlegmator with spout
3" clamp with gasket

Characteristics:
spiral diameter - 8 mm
spiral length -  6 m (double Dimroth – spiral in spiral)
utilization power - up to 6 kW

3” selection unit with multi-point distribution of nozzle irrigation

with needle tap and aftercooler

aftercooler with mini diopter with built-in water direction spiral

Description of the selection unit:
the author's selection unit, which reduces the near-wall effect to a minimum, with a multi-point (22 jets) distribution of reflux over the surface of the nozzle, which greatly increases its effect, since each of the 22 jets immediately, independently of each other, enters into the process of heat and mass transfer (but does not creates the effect of a “puddle” on the nozzle, as is the case with a large number of jets), which made it possible to reduce the working height of the main tube (tsarga), and has an aesthetic visualization of the process.

3" stainless steel main tube 500 mm with nipple for thermometer

The main tube is filled with with nozzle SPN 3*3.

"SK PROFI 3.0" set characteristics:

Distiller:
Productivity up to 3 l/h 96+ vol.%
Operating power 3 kW
Food grade non-magnetic stainless steel AISI-304
Selection by liquid
Utilization power of dephlegmator is up to 6 kW
Dephlegmator wall thickness - 1.5 mm

Distillation tank:
Volume 57 liters (50+7)
Stainless steel grade - non-magnetic! AISI-304
Bottom type - sandwich (food grade stainless steel/aluminium/magnetic stainless steel), suitable for all types of stoves, including induction
Bottom thickness 5 mm
Wall thickness 1 mm
Cover thickness 2 mm
Diameter 428 mm

Options for expanding the ability to operate the distillation tank:

Copper cone lid
Designed to eliminate unpleasant tastes and odors of sulfur compounds through contact with copper, and also works as a cube enlarger.

Copper insert
Designed to increase the contact area with copper. It is an excellent and more practical alternative to a copper tank. Contact with copper is doubled (due to the fact that the walls of the insert are washed on both sides). The insert is convenient to remove and wash.

Stainless steel tank magnifier
Allows to increase the volume of the distillation tank, it is completely sealed (fixed with a silicone seal and a stainless steel clamp).

Insert for cheese making
Allows to turn a distillation tank into a full-fledged home cheese factory-pasteurizer.

Steam-water insert
Allows to distill any type of mash, thick mash, fruit mash, etc. You can brew beer, distill grains, fruit mashes.

Brewing insert
Allows to use the tank as a mini-brewery.

Copper tank magnifier
Allows to increase the volume of the distillation tank, it is completely sealed (fixed with a silicone seal and a stainless steel clamp), eliminates unpleasant tastes and odors of sulfur compounds due to contact with copper.

Basket for malt and thick raw materials
A high-quality alternative to a false bottom. Protects the wort from burning (suitable for mashing wort, distilling thick raw materials, etc.).

Tank 57 liters (50+7) with thick (2 mm) dome lid with 3" clamp:

A specialized professional distillation tank with a completely removable lid, equipped with a stainless steel clamp-lock (clamp connection type), made of food-grade non-magnetic stainless steel AISI-304. A perfectly flat three-layer sandwich bottom ensures correct, uniform heating of the entire surface of the bottom, and not just the location of the heating source, to avoid burning and overheating. Inside the tank there is a volume marking. Suitable for all types of stoves. There is an exit for installing a heating element.

The heating element with power regulator is purchased separately.

Basic equipment:
Safety valve - 1 pc.
Connection for thermometer - 1 pc.
Cover with outlet for 2" clamp - 1 pc.
Lid clamp - 1 pc.
Silicone gasket under the cover - 1 pc.
Output for heating element + clamp + silicone gasket - 1 pc.
Drain tap 3/4 - 1 pc.
ATTENTION: The heating element with power regulator must be purchased separately.

Tank characteristics:
Stainless steel grade: AISI-304.
Bottom type: sandwich (food grade stainless steel/aluminum/magnetic stainless steel).
Bottom thickness: 5 mm.
Wall thickness: 1 mm.
Lid thickness: 2 mm.

Dimensions:
Diameter: 428 mm

Made in Ukraine