85 LITERS 3 INCHES "MAGNUM SPIRIT MAX" COLUMN WITH TWO MAIN TUBES

NEW MODEL 2023!

Rectification column "Magnum Spirit" 3 inches with a domed tank of 85 liters with two main tubes
With Dimroth dephlegmator and selection unit

Intended for separation of liquid mixes which components have various boiling points. Can be used for distillation of water and other liquids and mixtures, production of essential oils, hydrolats and aromatic water by evaporation and condensation (distillation) of raw materials.

Basic equipment of the "Magmun Spirit" device:

• Distillation tank of 85 liters with drain tap + nipple + thermometer
• 3" tsarga (main tube) side 500 mm - 2 pcs
• 3" Sampling unit MagProVisual with thermometer
• Stainless steel needle faucet
• Aftercooler
• 3" Dimroth dephlegmator
• 3" "Spout" with tube connection with the atmosphere
• Thermometer
• 2" Output for the heating element - 2 pcs
  
• Plug for the output for the heating element - 2 pcs
  
• 2" Clamps with gaskets 2 pc
• 3" Clamps with gaskets 5 pcs
• Panchenkova grid stainless steel 5 pcs
• Sanitary kit:
  → quick release brass 3 pcs
  → needle faucet (plastic) 1 pc
  → polyurethane hose 4 m
  → silicone hose 1 m
  → fum tape 1 pc

Two tsargas (main tubes) made of food grade stainless steel 304 for clamp 3"

Characteristics of the "Magnum Spirit" device:

• Assembly height (with tank 85L) 1970 mm
• Length of Dimroth dephlegmator tube: ≈ 6 m
• Dimroth dephlegmator tube diameter: 8 mm
• Maximum condensing power of the Dimroth dephlegmator: 6 kW*
• Main tube (tsarga) diameter: 76mm
• Main tube (tsarga) 1 height: 500 mm
• Main tube (tsarga) 2 height: 500 mm
• Quick-detach fitting 1/4" for 10 mm hose
• Food grade stainless steel AISI304

*power depends on the temperature of the water that is supplied, the connection method, the speed of the water supply and other factors

Packing parameters (L/H/W, weight):

85 L - 51/51/67 cm (25 kg)

3" MagProVisual - professional selection unit "by liquid" with a viewing window and a reflux concentrator

Own production (Magnum Still)

For clamp connection 3 inches

Principle of operation: Condensate, flowing down the spherical cover of the unit, enters the phlegm-accumulative zone. Excess liquid through round holes is directed to the reflux concentrator, flows down the wall and is centered by a short tube.

With the help of a needle valve, you can adjust the process of liquid selection. Setting drop-by-drop selection of "heads" does not cause any difficulties.

The thermometer is located in the steam zone, which makes it possible to measure the temperature of the steam without condensate getting on it and without temperature jumps.

Complete set of selection unit:

• 3" Selection unit MagPro Visual
• Digital thermometer
• Nipple (pressure gland, cable gland), nickel-plated brass

Three-tubes aftercooler (Magnum Still)

High-power aftercooler with three tubes inside and a communication tube with the atmosphere. Three partitions.
Thread 1/4" internal.
Product selection tube with an outer diameter of 10 mm.
Condensate after-cooling power – up to 5 kW.
Length 475mm.

The cooling water inlet and outlet fittings have a 1/4" internal thread. Quick couplings are designed to connect a hose with an outer diameter of 10 mm.

Complete set of sampling unit with aftercooler:

• 3" MagProVisual selection unit with a viewing window + nipple
• Digital thermometer
• Fine tuning valve (needle valve) made of stainless steel
• Three-tubes aftercooler internal thread 1/4"
• Quick coupling connections 2 pcs, chrome-plated brass

ATTENTION: it is important when assembling that the arrow on the needle valve is directed DOWN, to the connection with the aftercooler (as shown in the picture). Otherwise, the thread of the connection may be damaged.

Characteristics of the Dimroth dephlegmator:

• Tube length: ≈ 6 m
• Tube diameter: 8 mm
• Material: AISI304 food grade stainless steel
• Overall height: ≈ 250 mm
• Maximum condensing power: till 6 kW
• Quick couplings with external thread 1/4", for 10 mm hose

The "Magnum Spirit" package includes a new generation tank with a dome lid on a 3-inch clamp with a volume of 85 liters.

Advantages of advanced cubes:

• lack of welds;
• impeccable polishing quality;
• absolute tightness of all connections;
• appearance - domed;
• volume marking inside the tank;
• unique clamping system;
• rubberized heat-resistant handles.
  
  

All tanks are designed for use on all types of stoves.

The lid is domed. It is securely fixed by means of a clamping system consisting of four latches. The silicone gasket ensures the tightness of the connection. On the lid there is a sleeve for a thermometer, equipped with a special hermetic cuff, and an outlet for a 3-inch clamp. The function of the overpressure valve is performed by latches. Their flexible design relieves excess pressure. A ball valve provides drainage.

In the production of new generation cubes, innovative technology is used. The "seamless" design does not allow the remains of the mash to get stuck or burnt particles to accumulate. Perfect grinding eliminates the appearance of corrosion and microcracks.

Basic configuration of the tank:

• Distillation tank 85 liters with a spherical (dome) lid for a 3" clamp
• Silicone gasket
• Digital thermometer
• Nipple for thermometer, stainless steel
• Stainless steel drain tap, 1/2" female thread
• Output for the heating element 2 inches - 2 pcs
  
• Plug for the output for the heating element - 2 pcs
  

Tank features:

• Food grade stainless steel AISI304
• Volume of the tank is 85 liters
• Lid volume: ≈ 5,5 liters
• Cover thickness 1.2 mm
• The wall thickness of the tank is 1 mm
• The bottom thickness is approximately 5 mm. The bottom is flat, three-layer, with an aluminum layer for even heat distribution. Bottom material AISI 430 (magnetic food grade stainless steel)
• Rubberized handles
• Coupling for tap with external thread 1/2". Stainless steel tap 1/2"
• Stiffening rib for installing a false bottom at a distance of about 80 mm from the bottom
• Number of clips 5 pcs