60 LITERS 3 INCHES "CRYSTAL SPIRIT" CAP COLUMN 5 LEVELS GLASS-COPPER

€1150.00

Добавить в корзину

NEW MODEL 2023!

"Crystal Spirit 3.0" copper cap column 3 inches 5 levels in glass with a 60 liters dome tank
with 3 inches Dimroth dephlegmator in diopter
with 3 inches unique liquid selection unit in diopter
with 3-tubes aftercooler
with a sanitary kit

Intended for separation of liquid mixes which components have various boiling points. Can be used for distillation of water and other liquids and mixtures, production of essential oils, hydrolats and aromatic water by evaporation and condensation (distillation) of raw materials.

Basic equipment of the device "Crystal Spirit 3.0":

Distillation tank 60 liters with drain tap + nipple + thermometer
3" copper cap column in glass 5 levels
3" Selection (sampling) unit MagProVisual with thermometer
Stainless steel needle faucet
Three-tubes aftercooler
3" Dimroth dephlegmator in diopter
3" "Spout" with tube connection with the atmosphere
Thermometer
2" Output for the heating element
Plug for the output for the heating element
3" Clamps with gaskets 4 pcs
2" Clamp with gasket 1 pc
Sanitary kit:
→ quick release brass 3 pcs
→ needle faucet (plastic) 1 pc
→ polyurethane hose 4 m
→ silicone hose 1 m
→ fum tape 1 pc
Unique glass column 3 inches 5 levels with ProCap copper caps
(borosilicate glass)

Caps have a drain hole for phlegm in the center, which makes them universal. There is no need to place a drain cap. There is no need to place several pieces of expensive bubble caps. One ProCap operates on a very wide range from 800 to 2700 watts. Suitable for tanks up to 60 liters inclusive.

The principle of operation of cap trays is that the incoming working medium fills the tray up to the drain partition. In this case, caps are completely immersed in the liquid. Steam enters through the slots of the caps and bubbles through the layer of the working medium.

Ideal for fruit, grape, grain drinks. Copper retains the taste and smell of the original product, and also removes sulfur compounds.
Also suitable for working on sugar mash. For maximum purification of sugar distillates, it is advisable to install from 4 levels (plates) or an additional tsarga (main tube).
Specifications:
Height of 5 levels - 350 mm
External glass diameter - 60 mm
Glass wall thickness - 5 mm
Glass height - 80 mm
Material - food grade stainless steel (AISI 304), M1 copper, food grade silicone, borosilicate glass

Characteristics of the apparatus "Crystal Spirit 3.0":
Height assembled (without cube) 880 mm
Height assembled (with cube 40 L) 1380 mm
Height assembled (with cube 60 L) 1440 mm
Height assembled (with cube 85 L) 1500 mm
Length of Dimroth dephlegmator tube: ≈ 6 m
Dimroth dephlegmator tube diameter: 8 mm
Maximum condensing power of the Dimroth dephlegmator: 6 kW*
Maximum caps power: 3.5 kW
Main tube diameter: 76 mm
Quick-detach fitting 1/4" for 10 mm hose
Food grade stainless steel AISI304

*power depends on the temperature of the water that is supplied, the connection method, the speed of the water supply and other factors

Packing parameters (L/H/W, weight):

40 L - 40/40/54 cm (15.5 kg)

60 L - 45/45/59 cm (17.5 kg)

85 L - 51/51/67 cm (22 kg)

Water connection diagram:

3.0 inches vertical double-spiral Dimroth dephlegmator (the main cooler) in glass diopter
(borosilicate glass)

Characteristics of the Dimroth dephlegmator:

Tube length: ≈ 6 m
Tube diameter: 8 mm
Material: AISI304 food grade stainless steel
Overall height: ≈ 250 mm
Maximum condensing power: till 6 kW
Quick couplings with external thread 1/4", for 10 mm hose

3.0 inches MagProVisual - professional selection unit "by liquid" with a viewing window and a reflux concentrator
(borosilicate glass)

Own production of Magnum Still
for 3.0 inches clamp connection

Principle of operation: Condensate, flowing down the spherical cover of the unit, enters the phlegm-accumulative zone. Excess liquid through round holes is directed to the reflux concentrator, flows down the wall and is centered by a short tube.

With the help of a needle valve, you can adjust the process of liquid selection. Setting drop-by-drop selection of "heads" does not cause any difficulties.

The thermometer is located in the steam zone, which makes it possible to measure the temperature of the steam without condensate getting on it and without temperature jumps.

Passage holes for steam and reflux are staggered. Thanks to this solution, the steam does not interfere with the movement of phlegm inside the "glass" and all the condensate enters the center of the selection unit (reflux concentrator). Then he goes to the center of the main tube (tsarga) to irrigate the nozzle (main tube filler).

Complete set of selection unit:

3" Selection unit MagProVisual
Digital thermometer
Nipple (pressure gland, cable gland), nickel-plated brass

Three-tubes aftercooler (Magnum Still)

High-power aftercooler with three tubes inside and a communication tube with the atmosphere. Three partitions.
Thread 1/4" internal.
Product selection tube with an outer diameter of 10 mm.
Condensate after-cooling power – up to 5 kW.
Length 475 mm.

The cooling water inlet and outlet fittings have a 1/4" internal thread. Quick couplings are designed to connect a hose with an outer diameter of 10 mm.

Complete set of sampling unit with aftercooler:

3" MagProVisual selection unit with a viewing window + nipple
Digital thermometer
Fine tuning valve (needle valve) made of stainless steel
Three-tubes aftercooler internal thread 1/4"
Quick coupling connections 2 pcs, chrome-plated brass

ATTENTION: it is important when assembling that the arrow on the needle valve is directed DOWN, to the connection with the aftercooler (as shown in the picture). Otherwise, the thread of the connection may be damaged.

Distillation tank from Magnum Still 60 liters

The "Magnum Spirit 3.0" package includes a new generation tank with a dome lid on a 3-inch clamp with a volume of 60 liters.

Advantages of advanced cubes:

lack of welds;
impeccable polishing quality;
absolute tightness of all connections;
appearance - domed;
volume marking inside the tank;
unique clamping system;
rubberized heat-resistant handles.

All tanks are designed for use on all types of stoves.

The lid is domed. It is securely fixed by means of a clamping system consisting of four latches. The silicone gasket ensures the tightness of the connection. On the lid there is a sleeve for a thermometer, equipped with a special hermetic cuff, and an outlet for a 3-inch clamp. The function of the overpressure valve is performed by latches. Their flexible design relieves excess pressure. A ball valve provides drainage.

In the production of new generation cubes, innovative technology is used. The "seamless" design does not allow the remains of the mash to get stuck or burnt particles to accumulate. Perfect grinding eliminates the appearance of corrosion and microcracks.

In improved tanks there is an outlet for a heating element with a power of 3 or 4.5 kW. The heating element can be used as an alternative heating source instead of a stove or in combination with it to increase productivity.

Basic configuration of the tank:

Distillation tank 60 liters with a spherical (dome) lid for a 3" clamp
Silicone gasket
Digital thermometer
Nipple for thermometer, stainless steel
Stainless steel drain tap, 1/2" female thread
Output for the heating element 2 inches
Plug for the output for the heating element

Tank features:

Food grade stainless steel AISI304
Volume of the tank is 60 liters
Lid volume: ≈ 4 liters
Cover thickness 1.2 mm
The wall thickness of the tank is 1 mm
The bottom thickness is approximately 5 mm. The bottom is flat, three-layer, with an aluminum layer for even heat distribution. Bottom material AISI 430 (magnetic food grade stainless steel)
Rubberized handles
Coupling for tap with external thread 1/2". Stainless steel tap 1/2"
Stiffening rib for installing a false bottom at a distance of about 80 mm from the bottom
Number of clips 5 pcs

Made in Ukraine
Manufacturer - Magnum Still